Cisco Air Pwrinj6. Cisco Power Injector AIRPWRINJ6= Installation Guide Featuring two Gigabit Ethernet ports, the Cisco Aironet Power over Ethernet Injector helps you built a flexible installation by delivering IEEE 802.3af (15.4W) and IEEE 802.3at (30W) power to Aironet 2800 and 3800 series access points With a maximum wired connection range of 328' from your network switch to the.
Buy Cisco Switches Cisco Power Injector AIRPWRINJ6 Online in from www.metapoint.in
Page 4 12/9/2019 Cisco Aironet Power Injector AIR-PWRINJ6= Installation Guide - Cisco Installing the Power Injector Follow these steps to install the power injector: 1 The Cisco compatible Aironet Power Injector AIR-PWRINJ6 is designed for Cisco Aironet 2802E, 2802E (Config), 2802I, and 2802I (Config).
Buy Cisco Switches Cisco Power Injector AIRPWRINJ6 Online in
Since the maximum supported power of the switch is only 15.4w, we bought 4 poe injectors (AIR-PWRINJ6) Note The Cisco Aironet Power Injector AIR-PWRINJ6= is not weatherproof and hence is not meant to be used outdoors Cisco AIR-PWRINJ6 Datasheet Cisco AIR-PWRINJ6 802.3at Power Injector AIR-PWRINJ6 Cisco AIR-PWRINJ6 802.3at Power Injector The Cisco Aironet Power Injector AIR-PWRINJ6= increases wireless LAN deployment flexibility of supported Cisco Aironet Access Points by providing an alternative powering option to local power, inline power-capable multiport
Cisco AIRPWRINJ6 Power Injector 802.3AT. Plug a Category-5 Ethernet cable into the port on the power injector labeled AP The Cisco Aironet Power Injector AIR-PWRINJ6= increases wireless LAN deployment flexibility of supported Cisco Aironet Access Points by providing an alternative powering option to local power, inline power-capable multiport switches, and multiport power patch panels.
[Cisco AIRPWRINJ6=] IT Easyprice. It carries an integrated power supply that switches 100 to 240 volts AC into 49 - 60 Hz in order to produce power onto the Ethernet cable to power the access point Cisco power injector, AIR-PWRINJ6= 802.3af PoE Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 1 Gigabit Ethernet